Cummins Onan 2.0KV-FR/26119 Microlite Series 2000W generator natural gas fueled, encased in a sound-attenuating enclosure.

Model | Fuel | Hz | RPM | Watts | Voltage | Amps | Phase | Circuit breaker |
2.0 KV-FR/5902 | Natural Gas | 50 | 3000 | 2000 | 230 | 8.7 | 1 | 10 |
Weight 113 lbs (51 kg)
Length 24.0 in (610 mm)
Width 16.4 in (417 mm)
Height 12.3 in (313 mm)
Sound 70 dB(A) Readings at 10 ft (3 m) half load
- Meets National Park Service sound level requirements (60 dB(A)
@ 50 ft) for use in national parks.
- Typical installation will further reduce sound level.
Model: Cummins Onan GH-200
Design: 4-cycle, single cylinder, OHV
Displacement: 12 in3 (197 cm3)
Compression ratio: 8.5:1
Power: 7.0 bhp (max) at 3600 r/min
Cooling: Pressurized air
Cooling air volume: includes engine cooling air
volume
250 ft3/m (7.1 m3/min) at 3000 r/min
Fuel system: (Gasoline) electric fuel pump, fuel lift 3 ft
(914 mm); (LP) electric fuel solenoid; automatic choke
Combustion air:
50 Hz: 10.4 ft3/m (0.3 m3/min) at 3000 r/min
Ignition system: Breakerless, electronic
Starting system: Remote, 12 V, 3-wire negative
ground; start-stop rocker switch on control; connector
for remote start cable
Lubrication: Splash lubrication
Oil capacity: 1 qt (0.95 L)
Cylinder crankcase: Alloy aluminium with iron
cylinder liner cast into the block
Oil base: Aluminium
Cylinder head: Alloy aluminium, removable
Design: Cummins Onan 2-pole self-excited revolving field permanently aligned to engine by a tapered shaft
with drip-proof construction
Insulation system and temperature rise: Meets ANSI/RVIA EGS-1, BS-4999 standards and CSA Electrical Bulletin 946
Cooling: Direct drive centrifugal blower
Rotor: Laminated electrical steel assembly press-fitted to shaft, balanced, heavy insulated copper wire windings
Stator: Laminated electrical steel assembly skewed for excellent waveform; heavy insulated copper wire
windings
Voltage regulator: Electronic
DC brushes: Electrographite