OzCharge Battery Charger
OzCharge Battery Chargers from 6V to 24V
OZCHARGE FULLY AUTOMATIC INTELLIGENT SMARTCHARGER
DESIGNED FOR AUSTRALIAN CONDITIONS
Fully Automatic with Reverse Polarity Protection.
The OzCharge battery charger & maintainer has been designed by one of the worlds leaders in Battery chargers and is the perfect charger to keep lead acid batteries in prime condition in vehicles which do not get daily use.
- High frequency Switching Mode
- Full time pulse charge output
- Microprocessor controlled
- Multi charging rate - (Selectable)
- Suits Lead Acid Battery Types: Calcium, Conventional, Sealed, WET, GEL - (Selectable)
- Battery rejuvenation (De-Sulphation) function - (Selectable)
- Manual Battery Equalisation mode - (Selectable)
- Heavy-duty cables
- Corrosion-resistant output connectors and clamps
- Designed for Australian Conditions.
FEATURES:
Soft start: Charges the battery using half the maximum current until the battery voltage is over 10.5V. (Indicated by the BLUE Bulk LED Flashing)
Soft Start occurs if the initial voltage is less than 10.5V due to deep discharge.
Bulk Charge:
Charges using a constant maximum current until the battery rises to the absorption level. (Indicated by the BLUE Bulk LED ON)
Absorption:
This stage charges the battery using a constant voltage providing that the Battery Voltage is over 85%. The Charging Voltage for this stage is determined by the Battery type selection: GEL-14.1V; Sealed/WET-14.4V; Calcium-14.7V.
(Indicated by the GREEN Absorption LED ON)
If the Battery Condition is still less than 12.5V after absorption mode, this will be indicated by the GREEN Full LED flashing.
Automatic Equalisation Process (For Calcium Batteries Only):
The OzCharge Battery Charger also provides a battery equalisation function.
This stage begins automatically if the Calcium Battery type has been selected. This cycle pushes the charge voltage up to an equalising level of 16.2V.
(Indicated by the GREEN Absorption LED Flashing)
Equalisation helps to maintain and balance your battery cells by reversing the high concentration of electrolytes from the bottom of your battery. This allows all the cells to charge evenly and makes you get the most out of your battery. You can you this feature weekly to ensure your battery is always well maintained.
Note: If you select the Calcium battery type, the charger will automatically run the equalisation stage during the charging cycle, (You do not need to manually Press the Equalisation Button for Calcium Batteries)
The Equalisation process will not work for GEL Batteries.
Equalising voltage is set to 16.2V for Calcium batteries.
Analysis:
Diagnoses the battery condition for ten minutes. If the Full LED is flashing, this indicates that the battery is still less than 12.5V after the absorption mode and that there is a fault with the battery.
(Indicated by the GREEN Full LED ON)
Full / Float:
Battery is fully charged and is ready for use. It will be maintained at a safe constant voltage. Battery type selection: GEL-13.4V; Sealed/WET-13.5V; Calcium-13.6V.
(Indicated by the GREEN Full LED ON)
Rejuvenation Process (EXTEND YOUR BATTERY LIFE)
Your OzCharge Battery Charger provides a battery rejuvenation function.
Rejuvenation breaks down the crystalline form of lead sulphate within the battery cells which helps extend your battery life.
We recommend that you periodically use this rejuvenation (De-Sulphate) feature to ensure you get the maximum life out of your battery.
To activate this rejuvenation feature, simply press and hold the 'Equalisation' Button for 3 Seconds until the Rejuvenation LED begins flashing (BLUE).
Once the charger has entered the rejuvenation (de-sulphate) charging stage, the process will automatically time out after 24 hours or you can manually stop this process at any time by pressing and holding down the 'Equalisation' Button for 3 seconds.
| OzCharge OC-SW121009 900mA Battery Charger The OzCharge OC-SW121009 (900mA) Selectable 6V/12V battery charger & maintainer has been designed with one of the worlds leaders in Battery chargers and is the perfect charger to keep lead acid batteries in prime condition in vehicles which do not get used very often. | |
|---|---|---|
| OzCharge 12 Volt OC-SW121020 2 Amp Battery Charger The OzCharge 12 Volt OC-SW121020 (2 Amp) selectable lead-acid / gel 12 volt battery charger & maintainer has been designed with one of the worlds leaders in Battery chargers and is the perfect charger to keep lead acid batteries in prime condition in vehicles which do not get used very often. | |
| OzCharge 12 Volt OC-SW121040 4 Amp Battery Charger The OzCharge 12 Volt OC-SW121040 (4 Amp) battery charger & maintainer comprises of the latest microprocessor controlled switched mode technology. It is fully automatic with safety timers, reverse polarity, short circuit and overload protection and it comes standard with quick connect crocodile clips and a wall mount bracket. | |
| OzCharge 12 Volt OC-SW121060 6 Amp Battery Charger The OzCharge 12 Volt OC-SW121060 (6 Amp) battery charger & maintainer comprises of the latest microprocessor controlled switched mode technology. It is fully automatic with safety timers, reverse polarity, short circuit and overload protection and it comes standard with quick connect crocodile clips and a wall mount bracket. | |
| OzCharge 12 Volt OC-SW121080 8 Amp Battery Charger The OzCharge 12 Volt OC-SW121080 (8 Amp) battery charger & maintainer comprises of the latest microprocessor controlled switched mode technology. | |
| OzCharge 12 Volt OC-SW121160 16 Amp Battery Charger The OzCharge 12 Volt OC-SW121160 (16 Amp) battery charger & maintainer comprises of the latest microprocessor controlled switched. | |
| OzCharge 12 Volt OC-SW121210 21 Amp Battery Charger The OzCharge 12 Volt OC-SW121210 (21 Amp) battery charger & maintainer comprises of the latest microprocessor controlled switched mode technology. | |
| OzCharge 24 Volt OC-SW241040 4 Amp Battery Charger The OzCharge 24 Volt OC-SW241040 (4 Amp) battery charger & maintainer comprises of the latest microprocessor controlled switched mode technology. |
