Used Industrial Generators / Up to 200kVA
43kVA Used Cummins Enclosed Generator Set (U637)
$14,245.00 inc GST($12,950.00 ex GST)
- Oil
- Run-Up
- Load Tested
Every generator we sell is:
- Filled with oil at no extra cost
- Run & load tested to rated capacity
- Ready to use as soon as you receive it
Rated at N.T.P. Conditions
This Cummins ES43 diesel generator is an ex-Macgen hire fleet, in good condition, freshly serviced, tested, & can be repainted (if required), and would suit a variety of Industrial or Commercial applications.
With Service history.
Details
| Specifications | |
|---|---|
| Engine Model | Cummins S3.8G4 |
| Type | Turbocharged, liquid cooled electric start diesel |
| HP | 43 approx |
| RPM | 1500 |
| Cylinders | 4 |
| Run hours shown | 00745 (Run hour counter replaced at 2259 hours) |
| Alternator | Stamford UCI224C1 |
| kVA | 43 Standby rated (40 Prime rated) |
| kW | 33 Standby rated (30 Prime rated) |
| Power factor | 0.8 |
| Other | 240/415V at 50Hz, brushless |
| Features | Dimensions (LWH): 2270 x 1100 x 1740mm |
| Engine, alternator and radiator mounted on a substantial skid base | |
| Installed in a weather protected, sound reduced canopy | |
| Industrial grade engine muffler and flexible connection fitted | |
| Single wall integral base fuel tank approximately 150 litres | |
| Battery pack heavy duty 12 Volt, with battery isolator | |
| Engine driven battery charger | |
| Cummins PCC1300 generator control panel, with automatic & manual starting | |
| Engine protection for high coolant temperature and low oil pressure | |
| Analogue gauges, showing oil pressure, coolant temperature, Volts, Amps and Hz | |
| Generator mounted 3 pole 63Amp MCCB | |
| Outlets: IP66 2 x 32A 5-pin 3Ph, 3 x 15A 1Ph, w/CB & RCD protection | |
| Built: 2006 | |
| Load test report | |
| Cleaned (and repainted if required) | |
| Operating and maintenance manuals | |
| Reference | U637 |
