Used Industrial Generators / Up to 200kVA

20kVA Used Dorman Enclosed Generator Set (U641)

$9,350.00 inc GST($8,500.00 ex GST)
The Macfarlane Advantage
  • Oil
  • Run-Up
  • Load Tested
Every generator we sell is:
  • Filled with oil at no extra cost
  • Run & load tested to rated capacity
  • Ready to use as soon as you receive it
Trust your generator with Macfarlane Generators, a real generator company that has been operating for 70+ years.

We stock a full range of spares, run a full service department, have stores across Australia and employ an experienced team with extensive generator knowledge

We provide the best generator sales and after-sales support in Australia.

Rated at N.T.P. Conditions

This used GEC Dorman 3DA enclosed generator has been freshly serviced, has low hours, and is mounted in a sound reduced enclosure, with base fuel tank, suitable for many applications.

Call 1300 622 436 for more info.

Details
Specifications
EngineGEC DORMAN 3DA
Type
Naturally aspirated, air cooled, electric start, diesel
HP300 approx
RPM1500
Cylinders6
Run hours shown00388
AlternatorSTAMFORD BC148E
kVA22 Standby rated (20 Prime rated) 
kW18 Standby rated (16 Prime rated) 
Power factor0.8
Other240/415V at 50Hz, brushless
FeaturesDimensions (LWH): 2450 x 1150 x 2100 mm (including silencer) 
Weight: 1100kg approx (with lubricant & coolant, no fuel)
Engine, alternator and installed in a sound reduced enclosure with base fuel tank
Roof mounted industrial grade muffler with flexible connection 
Bunded integral base fuel tank approximately 300 litres
Battery pack heavy duty 24 Volt
Engine driven battery charging alternator
Engine water jacket heater fitted
DSE 520 generator controller with automatic remote/manual starting
Engine protection for high coolant temperature and low oil pressure
Control panel shows oil pressure, engine temp, Volts, Amps, Hz, RPM 
Generator mounted  3 pole MCCB 
Built: 1972
Load test report
Pre-delivery service
Operating and maintenance manuals
ReferenceU641

Note: Customers are responsible for ensuring the products meet their specific needs.