Used Industrial Generators / Over 200kVA

300kVA Used Detroit Open Generator (U569)

On Sale!
$29,040.00$28,545.00 inc GST($25,950.00 ex GST)
The Macfarlane Advantage
  • Oil
  • Run-Up
  • Load Tested
Every generator we sell is:
  • Filled with oil at no extra cost
  • Run & load tested to rated capacity
  • Ready to use as soon as you receive it
Trust your generator with Macfarlane Generators, a real generator company that has been operating for 70+ years.

We stock a full range of spares, run a full service department, have stores across Australia and employ an experienced team with extensive generator knowledge

We provide the best generator sales and after-sales support in Australia.

Rated at N.T.P Conditions

This used Detroit Diesel model 6V92TA open generator set, has been freshly serviced and load tested, mounted on a substantial skid base, and would be suitable for Commercial and Industrial applications.

Drop over enclosure included.

Call 1300 622 436 for more info.

Details
Specifications
EngineDETROIT DIESEL 6V92TA
Type
Turbocharged, after-cooled liquid cooled, electric start, diesel
HP345 approx
RPM1500
Cylinders6
Run hours shown00034
AlternatorSTAMFORD HCI534C
kVA300 Standby rated 
kW240 Standby rated 
Power factor0.8
Other240/415V at 50Hz, brushless
FeaturesDimensions (LWH): 2820 x 1500 x 1900mm
Weight: 2300kg (with lubricant & coolant, no fuel)
Engine, alternator and radiator mounted & installed on a substantial base
Industrial grade muffler with flexible connection, and 3m exhaust pipe 
Fuel tank in base approx. 350L
Battery pack heavy duty 24 Volt
Engine driven battery charging alternator
Engine water jacket heater fitted
Intel AMF25 with automatic remote/manual starting
Engine protection for high coolant temperature and low oil pressure
Control panel shows oil pressure, coolant temp, Volts, Amps, Hz, RPM & Hours run
Generator mounted Schneider 280-400A
Built: approx. 1980s
Load test report
Pre-delivery service
Operating and maintenance manuals
ReferenceU569

Note: Customers are responsible for ensuring the products meet their specific needs.