Generators & Power / Construction and Power Equipment / All Pumps

ABS J405 Submersible Drainage Pump

Please contact us for pricing and availability

The Macfarlane Advantage
  • Oil
  • Run-Up
  • Load Tested
Every generator we sell is:
  • Filled with oil at no extra cost
  • Run & load tested to rated capacity
  • Ready to use as soon as you receive it
Trust your generator with Macfarlane Generators, a real generator company that has been operating for 70+ years.

We stock a full range of spares, run a full service department, have stores across Australia and employ an experienced team with extensive generator knowledge

We provide the best generator sales and after-sales support in Australia.

Submersible drainage pump type ABS J 405 is suitable for pumping water and dirty water mixed with light abrasives. The pump design enables convenient transport, handling and installation.

Details
  • Motor rating P2 35 kW, 3
  • Voltage (V) 230 / 400 / 500-550 / 690 / 1000
  • Full load (A) 108 / 62 / 51 / 36 / 25
  • Speed 2945 rpm
  • Strainer hole 8 x 34 mm
  • Discharge connections Hose 4”, 6”, 8”
  • Thread G/BSP 4”, 6”, 8”
  • Weight (excl. cable) 270 kg
  • Motor protection Thermal overload sensors
  • Electric cable 20 m

ABS J405 HD Submersible Drainage Pump (High Head)

Easy to start

  • Pump J 405 has a built-in contactor connected to the thermal sensors in the stator windings, which protects the motor from overheating and features an automatic restart function. Pumps J 405 have thermal sensors in the stator windings that protect the motor from overheating by means of an external control panel.

Wear resistance

  • Abrasive-resistant impellers, combined with diffusers and wear rings coated in oil-resistant nitrile rubber, provide extended pump life in tough applications.

Reliable operation

  • Double mechanical shaft seals in an oil bath, with primary seal surfaces in silicon carbide, extend the life of the pump. In a pump, J 405 the primary and secondary seals comprise an easy to replace seal cartridge. A double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor.

Serviceability

  • External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. The adjustable wear ring ensures proper clearance throughout the impeller lifetime.

Flexibility

  • Conversion between high-volume and high-head hydraulics is managed with only a few parts, ensuring the right performance for the application.